All buildings are manufactured
using G550 High Tensile Steel Sheets, with a thickness of 0.30mm, clad
onto a a mild steel frame up to 0.7mm thick. They are substantially
heavier and sturdier than other 'thin clad steel sheds' such as the
StoreMore or Yardmaster buildings.
All sheds in the Grandale
range are painted inside and out with a high quality Epoxy Primer and
Top Coat, with the outside having a Regular Modified Polyester finish.
On top of the Galvanised Zinc Coating, this will ensure that these sheds
will not rust through for at least 12 years.
Doors and Locking System
The double sliding doors on
the Grandale 'Low Pent' range open to 69cm wide, and when closed the handles
come together to allow the doors to be padlocked.
These buildings are supplied in a flat-pack,
and the assembly is uncomplicated. Only basic
tools are required, and no professional experience is necessary.
Normally 1 person can complete the job in approximately 4 hours, but an erecting service is also available at an extra charge
(depending on your area) if required. Please
ask when placing your order.